Proto Armour for Raspberry Pi
Proto Armour for Raspberry Pi is a protective enclosure designed specifically for the very popular Raspberry Pi credit-card sized computer. Students, engineers and designers alike, all love the Raspberry Pi for its small size and big list of features and capabilities. While low cost and strong community support top the feature list, an area that challenges many Pi enthusiasts however is experienced first hand while breaking out connections to external hardware and peripherals. Attaching a few cables to the board immediately reveals how lightweight the device is and how vulnerable it is to physical harm. The Raspberry Pi, like most other development boards, is a small fully exposed circuit board with limited non-standard mounting features. Proto Armour for Raspberry Pi offers wrap-around protection and supplements the board's limited non-standard mounting capabilities with a host of structural support and standardized mounting features.
- Durable Construction
- Structural Modular Design
- Passive Cooling
- LED Indicators
- Security Friendly
Experimentation is often performed outside the safety of a lab environment. Gadgets usually contain breadboards and sensitive electronics that require a layer of protection, or better yet - a layer of armour. Proto Armour for Raspberry Pi is made from aircraft-grade aluminum using state-of-the-art CNC equipment at our facility in Orchard Park, New York USA. Parts are machined to exacting specifications, resulting in an enclosure that fits your Pi like a glove. Many surface treatments are available, ranging from a cost-effective bare metal finish, to a professional looking anodized coating in a variety of colors.
Structural Modular Design
Gadgets sometimes require external components or subsystems that are mounted close by. Proto Armour for Raspberry Pi features an assortment of threaded holes and structural reinforcements that facilitate the mounting of external components and subsystems directly to the case. Other versions of Proto Armour protective enclosure hardware is compatible with a variety of platforms such as Arduino development boards, Freescale Freedom Platform, and 'mbed' modules from ARM. In most cases, Proto Armour hole spacing allows for interlocking several enclosures into a single assembly. Accessories such as brackets and spacers are designed to be compatible across the product line where possible.
The Raspberry Pi supports overclocking, but this practice generates additional heat that could damage the board. Proto Armour for Raspberry Pi dissipates heat from the CPU, Ethernet controller, and voltage regulator. Three heat sinks are machined directly into the top half of the housing and interface with each heat source using a thermally conductive pad.
The Raspberry Pi includes five LEDs that indicate various status information. Proto Armour for Raspberry Pi features five though holes, each perfectly aligned with a Pi LED. Acrylic light pipes are included that conduct LED illumination to outside the enclosure for easier viewing.
The Raspberry Pi is a very cool gadget. Whether it is a classroom setting where several Pi boards need to be attached to student benches, or at a hackerspace meetup where a new creation is on display, it is critical to properly secure sensitive and valuable hardware. Proto Armour for Raspberry Pi is assembled using machine screws that are threaded from the bottom and hidden from unintended guests. The included through holes facilitate mounting the enclosure directly to a tabletop using special tamper resistant screws. Cover plates are also available to prevent cable detachment and memory card removal.
While functionality and quality are equally priority number one, affordability goes without being said. In line with the Raspberry Pi's cost effective design, Proto Armour for Raspberry Pi is designed for manufacture, resulting in a lower cost of manufacture that enables low cost of ownership. New enclosure and accessory design is a careful balance of functionality, robust construction, and affordability for all.
|Physical / Environmental|
|Enclosure Size||4.97 x 2.97 x 0.97 in (length, width, height)|
|Enclosure Materials||Bare (standard) or Anodized (option) 6061 Aluminum, Black Nylon Plastic|
|Board Mounting||4-40 x 2 screws (Model A and B v2), edge support x 2 (Model B v1)|
|Threaded Mounting Holes||6-32 x 4 per surface (except bottom)|
|Security Mounting Holes||#6 countersunk 82° x 4 (bottom surface)|
|Passive Cooling||CPU, Ethernet controller, voltage regulator|
|Port Access||Power, GPIO, video, audio, LED, USB, Ethernet, HDMI|
|Enclosure||Top and bottom compatible with all Raspberry Pi boards|
|Raspberry Pi Hardware Pack||Screws, washers, pins, bumpers, light pipes, thermal pads, wrenches|
|Welcome Document||Assembly instructions and parts list|
|Anodized Finishes||Black, Red, Clear|
|Special Anodized Finishes||Green, Blue, Yellow, Gold, Orange, Gray, Pink|